General safety instructions
- Repair must be carried out only by a specialist.
- Opening the pedal with SD card inside card reader will result in damage.
- Never use devices with a defective power cord.
- Read the operating instructions completely and carefully.
- If the device is damaged, let it be checked by a specialist before further usage.
- Make sure cables are not strained, kinked or are in contact with any kind of sharp edges.
- Always unplug the device when not in use.
- Only operate the device as described in this manual.
- Only use accessories specified by the manufacturer.
Warning and Safety Instructions
WARNING! ELECTRIC SHOCK!
- Check the power supply and the device for any kind of damage before using it. If there is any visible damage, do not use the device.
- Do not short-circuit the output of the power supply.
CAUTION!
- Check the power supply and the device for any kind of damage before using it. If there is any visible damage, do not use the device.
- Do not short-circuit the output of the power supply.
- Do not use the power supply and the device in any other way described as in the following instructions for use.
- Do not handle liquids during operation.
- Do not change or modify the power supply or the device.
- Only use the supplied power supply.
- Clean the power supply and the device only with slightly damp cloth.
- Avoid contact of moisture with the sockets.
- The device consists of a robust metal housing. However, refrain from excessive mechanical loads on the device by climbing, stepping on, or throwing it around.
CAUTION!
- When operating the footswitches, be careful not to damage the LCD display. If damaged, LCD liquid may leak out. This is hazardous to health! Refrain from any further use of the player! Avoid contact with the liquid. Dispose of the player at a designated disposal point for electronic waste.
WARNING!
- Do not charge your smartphone or other devices via the player’s USB ports.
Maintenance and Care
Use a soft, dry cloth to clean the P-1. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, wax, or solvents (such as paint thinner or cleaning alcohol), since these may dull the finish or damage the surface.
Disposal
DO NOT DISPOSE ELECTRONIC DEVICES IN HOUSEHOLD WASTE.
According to the European directive on waste electrical and electronic equipment and its implementation in national law, electrical equipment that is no longer usable must be collected separately and recycled in an environmentally friendly manner.
European Union regulation compliance statement
This product has been tested to comply with the Low Voltage Directive 2014/35/EU - Standard EN 62368-1, and the Electromagnetic Compatibility Directive 2014/30/EU - IEC 62368 -1: 2018. The product meets the requirements of RoHS 2 Directive 2011/65/EU.
Protection class III – low-voltage protection
FCC regulation compliance statement
Supplier’s Declaration of Conformity This Declaration of Conformity is hereby issued according to Chapter 1, Subpart A, Part 2 of Title 47 of the Code of Federal Regulations by: Idoru Live UG Ohlauer Str. 44 Berlin 10999 Germany contact@idoru.live
Idoru P-1 complies with the applicable requirements of FCC Rule Part 15
RESPONSIBLE PARTY located in the United States: Testing Partners LLC 18200 SR 306 Chagrin Falls, OH 44023 info ‘at’ testingpartners.com
Legal disclaimer
The information in this document is subject to change without notice and should not be construed as a commitment by Idoru Live. Idoru Live assumes no responsibility for any errors that may appear in this document. Idoru Live may also make improvements and/or changes in the products and programs described in this document at any time without notice. In no event shall Idoru Live be liable for any special, indirect, or consequential damages or any damages whatsoever resulting from loss of use, data, or profits, whether in an action of contract, negligence, or other action, arising out of or in connection with the use or performance of this information.
WEEE registration number
We are registered as a manufacturer of electrical and/or electronic devices with the registration number DE 97363330 at the stiftung elektro-altgeräte register, Nordostpark 72, 90411 Nuremberg .
Limited Warranty:
Idoru Live UG warrants the Idoru P-1 ("Product") to be free from defects in materials and workmanship under normal use for a period of 2 years from the date of purchase, as evidenced by the purchase receipt. During the warranty period, Idoru Live UG will, at its discretion, repair or replace defective parts or products.
Exclusions:
This warranty does not cover:
- Damage resulting from accidents, misuse, abuse, or neglect.
- Damage resulting from modifications or unauthorized repairs.
- Normal wear and tear.
- Damage resulting from exposure to extreme temperatures, moisture, or other environmental conditions.
- Products not purchased from authorized Idoru Live dealers or distributors.
Warranty Claims:
To make a warranty claim:
- Contact Idoru Live customer service at contact@idoru.live.
- Provide proof of purchase.
- Follow the instructions provided by the customer service representative.
Limitation of Liability:
Idoru Live's liability under this warranty is limited to the repair or replacement of the defective product. Idoru Live shall not be liable for any incidental or consequential damages resulting from the use or inability to use the product.
Transferability or assignment of warranty:
This Limited Warranty is extended to the original retail purchaser (including purchases directly from Idoru Live) ONLY. This Limited Warranty cannot be transferred to anyone who may subsequently purchase this product.All Warranty coverage shall be determined by Idoru Live UG, at its sole discretion.
User guide contents:
What is the Idoru P-1?
Safety instructionsIntroduction to the Idoru P-1Overview - ports and interfaceConnecting the P-1 at VenuesQuick Start Guide1. Set up your songs in the software
2. Connect your P-1 to the sound system
Controls and connections
Transport controlsControl systemMenus and settingsRouting and mixing
Routing and mixingMIDI
MIDIMIDI exported from Ableton Live
Devices to control the Idoru P-1 via MIDI
Updating the firmware
How to update the firmwareSD cardsWhat kind of SD card should I use?